Enjoy 365 shaves with your manual razor thanks to the R-Blades Process

| Easy to make | Savings of $420/year | Eliminate GHG emissions
  • The manufacturing method is provided in a R-Blades Report.
Get the R-Blades Report 🎁
No charge. No commitment !
As seen in :

The secrets about the process

The secrets surrounding the R-Blades Process reveal that a worn-out blade is simply misaligned.

It is during shaving that the blade becomes blunt, due to the numerous stresses it undergoes when pressed against the hair. This is visible under a microscope. But when you realign the blade to 99% with the R-Blades Process, you restore its sharpness, i.e., the cutting edge of the manual razor is restored.

This allows us to say that the R-Blades Process easily regenerates a manual razor blade cartridge.

Tirelire sur une table avec des economies sur une table

Save a lot of money

Imagine the economies if you never have to replace your razor blade again. The blade would stay sharp enough to give you a flawless shave and a smooth skin, without ingrown hairs or cuts for 365 shaves.

No need to mention how much you would save by using only one blade cartridge per year!

All this is possible thanks to the R-Blades process !

Guess how much you would save : $420 ! Plus, you’d enjoy special comfort.

And that’s not all.

You have 18 times more regenerations, left with the same cartridge.

Furthermore, if you do this over the 25 years with a 3% annual increase in the cost of living, you will save $20,000 !

Eliminating this head of expenses would allow you to invest more and buy additional gifts for your loved ones.

Tirelire sur une table avec des economies sur une table
Personnes réunies ensemble pour une cause écologique R-Blades Movement

Reduce GHGs – in real terms !

Greenhouse gases (GHGs) are gases in the atmosphere that trap heat and act as an insulating agent for the Earth. However, an increase in GHGs due to human activities intensifies this effect, causing global warming.

There are no comprehensive research reports directly linking GHGs to manual razors. However, according to a statement in the leading newspaper Le Devoir, the environmental impact mainly emanates from producing and disposing of blade cartridges.

With the R-Blades Process, you can reduce the GHGs associated with your manual razor by 99%. Collectively, this means billions fewer disposable or refillable razors need to be produced, packaged, transported, and disposed of.

Extend the life of your blades, reduce waste, and save money !

Do you have any questions ?

Start by checking the dashboard below. If you still have questions, our team is available to help you : info@r-bladesmovement.com
Why is the process free ?

The R-Blades organization has a specific mission and a target: Reducing the worldwide carbon impact of manual razors by 99%.

To achieve this target, we are sending you the R-Blades Report free of charge. This report allows you to manufacture the process at home. For transparency and authenticity, we then ask for your dedicated support for the worldwide distribution of the R-Blades process. Is this mandatory ? Absolutely not !

Would you like to receive useful advice and information to complete the process without supporting us ? Yes, absolutely ! The choice is yours, but we hope you will use the process and share your feedback with us.

Does regenerating a dirty blade leaf behind bacteria ?
The simple answer is a big NO ! The R-Blades process cleanses and sterilizes blades, leaving them with zero deposits and impurities. And, the blade is as clean as a new one. This has been validated by laboratory tests.
Does a regenerated blade cut as fine as a new one ?
Regeneration process restores the blade’s edge, providing a shave as smooth as a new blade does after the first use. Some users even say it is more comfortable because the blade has already been “softened”.
It must be dangerous. Won’t I cut myself more easily ?
On the contrary, R-Blade technology realigns the metal of the blade. This reduces the risk of micro-cuts compared to a worn blade. It is safer than a worn razor.
Is it stingy to regenerate your blades instead of buying new ones ?
Regenerating your blades is futuristic, smart, and eco-friendly. It is not being stingy. It is being a conscientious consumer who cares about their wallet as well as the planet.
I have always bought new blades, why to change ?
You keep the same shaving routine, but still you save time, money, and reduce the carbon impact caused by you. It is a small individual gesture with a big collective impact.
If it really worked, would not everyone be already doing it ?

It is the same as when electric cars first came out. An important innovation that eventually becomes something indispensable. Those who adopt the R-Blades Process early can enjoy certain advantages.

How to receive the : “Manual Razor Decarbonisation Certificate”. One day, this personalized, frame-ready certificate could prove to be of inestimable psychological value to you and your family.

Is it surely complicated to use ?
Not at all ! Once the regeneration context is set up, the regeneration itself is automated. After 4 hours of blade regeneration, your razor is ready for another cycle (one cycle corresponds to 7 shaves).
Does it work with all brands of manual razors ?
Yes. The R-Blades process works with all brands of manual razors on the market, namely, Gillette, Bic, Schick, Wilkinson, and others.
Is there a risk of irritation with a regenerated blade ?
No. After regeneration, the blades regain their sharpness. On the contrary, you reduce the risks associated with worn blades that pull on the hair and irritate the skin.
Is it suitable for sensitive skin ?
Yes. Shaving with a cartridge of well-regenerated blades is gentler and reduces redness. This means that the razor is perfectly suitable for sensitive skin.
The origin of R-Blades ?

During the negotiation between Thierry Laforest and Procter & Gamble, concerning the technological transfer of the R-Blades process, a climate hope has risen and set out on its journey. This climatic hope is still tenuous, frail and hesitant. It moves forward gropingly, as if dazzled by its own light. But, with each step, it gains confidence, assurance, and determination until the day of the dissemination of the history of the origin of R-Blades.

The story of the origin of R-Blades will be revealed to you very soon in the magazine Paris Match !!

Please note, Procter & Gamble (P&G) is a publicly traded company, and it is also included in the Dow Jones index. More specifically, it is listed on the New York Stock Exchange (NYSE) under the symbol “PG”.

Who is Thierry Laforest ?
Thierry Laforest is the founder and CEO of R-Blades movement. He has spent his career studying regeneration. After 11 years of research, he developed a process that allows manual razor blades to be regenerated. He is recognized by institutions as the world’s leading authority on the regeneration of manual razor blade cartridges.